Ultra-Thin Canless Recessed Lighting
5CCT LED Wafer Downlights
Ultra-thin, canless recessed cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits designed for contractors, distributors and commercial project supply. Choose 3-inch, 4-inch, 6-inch or 8-inch sizes with field-selectable color temperature, Triac dimming and a slim 12mm fixture profile.
Productoverzicht
Canless Recessed Lighting for Tight Ceiling Spaces
The ultra-thin wafer design provides recessed ceiling lighting without requiring a traditional recessed can. At only 0.47 inches (approximately 12mm) thick, the fixture is designed for shallow plenum conditions and other ceilings where conventional recessed housings can be difficult to accommodate.
A remote junction box supports canless installation, while the integrated 5CCT switch lets installers select the required color temperature on site. This helps distributors and contractors use one fixture family across different rooms and project requirements.
5-in-1 Field Selection
One Wafer Downlight. Five Color Temperatures.
The integrated selector allows the installer to choose from five color temperatures on site. Instead of stocking separate fixed-CCT fixtures, distributors and contractors can cover multiple project requirements with one selectable platform.
This is especially useful for projects where final interior finishes, tenant preferences or room functions may require different color temperatures.
Size & Output Options
3", 4", 6" & 8" LED Wafer Downlights
Select the aperture and output according to room scale, fixture spacing and ceiling design. All four models use the same 120Vac platform, selectable CCT range and slim 0.47-inch fixture profile.
Technical Data
LED Wafer Downlight Specifications
A common electrical and optical platform across four fixture sizes simplifies specification for multi-room and repeat commercial projects.
| Nominale grootte | Vermogen | Lumen | Fittingmaat | Cut-Out Size | Input | CRI | Dimbaarheid |
|---|---|---|---|---|---|---|---|
| 3 inch | 6W | 300 lm | Ø3.54" × 0.47" | Ø2.76"–2.95" | 120Vac, 60Hz | 80–85 | Triac |
| 4 inch | 9W | 810 lm | Ø4.72" × 0.47" | Ø3.94"–4.33" | 120Vac, 60Hz | 80–85 | Triac |
| 6 Inch | 12W | 1080 lm | Ø6.69" × 0.47" | Ø5.91"–6.30" | 120Vac, 60Hz | 80–85 | Triac |
| 8 Inch | 18W | 1440 lm | Ø8.86" × 0.47" | Ø7.87"–8.27" | 120Vac, 60Hz | 80–85 | Triac |
Designed for Installation
Why Contractors Use Canless Wafer Downlights
The product platform is built around practical installation and inventory requirements: shallow fixture depth, field-selectable CCT, remote junction box installation and multiple aperture sizes.
12mm Ultra-Thin Profile
The 0.47-inch fixture depth supports installation in shallow ceiling spaces where conventional recessed housings may not fit.
Remote Junction Box
The canless configuration eliminates the need for a traditional recessed can and is designed around labor-efficient installation.
5CCT Field Selection
Select 2700K, 3000K, 3500K, 4000K or 5000K during installation, reducing the need to stock multiple fixed-CCT versions.
ETL Listed & IC Rated
The product family is designed for North American projects and is rated for direct contact with ceiling insulation.
Canless Installation
Built for Shallow Plenum Conditions
Unlike traditional recessed lighting that depends on a housing can, the wafer fixture uses an ultra-thin light engine with a remote junction box.
The original product platform is designed to fit ceilings with as little as approximately 2 inches of clearance, making it useful for renovation and other projects where ceiling depth is restricted.
Projecttoepassingen
Where LED Wafer Downlights Are Used
The low-profile canless format works across hospitality, retail, multifamily and other interiors where distributed recessed lighting and limited ceiling depth are important.
Contractor & Wholesale Supply
Source LED Wafer Downlights for Your Next Project
This product family is intended for North American contractor, distributor and project purchasing. Four fixture sizes and field-selectable CCT make it easier to standardize recessed lighting across multiple project areas.
Send us your required sizes, quantities and project schedule for current specifications and factory-direct pricing.
LED Wafer Downlight FAQ
Veelgestelde vragen
Key information for contractors, distributors and project buyers specifying ultra-thin canless recessed lighting.
What is an LED wafer downlight?
An LED wafer downlight is an ultra-thin recessed fixture designed to install without a traditional recessed can. This series uses a 0.47-inch light engine and remote junction box.
What sizes are available?
The product family includes 3-inch, 4-inch, 6-inch and 8-inch nominal sizes.
What color temperatures can be selected?
The integrated 5CCT selector provides 2700K, 3000K, 3500K, 4000K and 5000K settings.
Do these wafer lights require a recessed can?
No. The canless design uses a remote junction box and does not require a traditional recessed housing.
Are the wafer downlights dimmable?
Yes. The listed models use Triac dimming.
Are these wafer downlights IC rated?
Yes. The product family is ETL Listed and IC Rated for direct contact with ceiling insulation.
What is the warranty?
The listed product series carries a 5-year warranty and a 50,000-hour rated lifetime.
Can I request contractor or wholesale pricing?
Yes. Send your required fixture sizes, quantities and project schedule to request current project pricing and technical documentation.
5CCT Canless Recessed Lighting
Need Wafer Downlights for a Commercial Project?
Tell us the required size, quantity and project schedule. We can provide current technical specifications and factory-direct project pricing for 3-inch, 4-inch, 6-inch and 8-inch LED wafer downlights.