IP65 Surface Mounted LED Downlights

Designed for commercial spaces that need a clean ceiling-mounted form and added protection against dust and water jets. This cylindrical LED downlight series combines an extruded aluminum housing, a standard 55° beam angle and six size options from 15W to 60W.

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits15W–60W100 lm/W55° Beam AngleWhite / Black
프로젝트 견적 요청 View Specifications
6Size options
15–60WPower range
100lm/W nominal efficacy
CRI 80/90Color rendering options
Black IP65 surface mounted cylindrical LED ceiling downlight
Surface-Mounted Cylinder Design

A Surface Mounted IP65 Downlight Series for Commercial Ceilings

Unlike recessed fixtures, these IP65 ceiling downlights are installed directly onto the ceiling surface. The cylindrical profile creates a defined architectural detail while keeping the installation approach straightforward for suitable ceiling structures.

With six housing sizes, two finish choices and CRI 80 or CRI 90 options, the range gives lighting distributors, specifiers and project contractors a coordinated family for different commercial lighting 설치 및 규정 준수 누락.

  • 압출 알루미늄 하우징
  • Surface-mounted ceiling installation
  • IP65 protection rating
  • Standard 55° beam angle
  • 220–240V AC input
  • White and black finishes
White IP65 surface mounted cylindrical ceiling downlight
Six Sizes · Six Power Options

IP65 LED Ceiling Downlights from 15W to 60W

Choose the cylindrical surface-mounted LED downlight size and wattage to suit the scale and lighting requirements of the space. All six sizes are available in black or white.

One coordinated range for different project scales

The series progresses from a compact Ø80 mm housing to a larger Ø200 mm format. This allows project teams to maintain a consistent cylindrical design language while selecting different output levels.

Nominal luminous efficacy: 100 lm/W.

Calculated lumen outputs below are indicative estimates based on 100 lm/W. Confirm final measured luminaire output against the approved product datasheet.

Diameter × Height전원cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits마감
Ø80 × 90 mm15W1,500 lmBlack / White
Ø100 × 100 mm20W2,000 lmBlack / White
Ø130 × 130 mm30W3,000 lmBlack / White
Ø150 × 140 mm40W4,000 lmBlack / White
Ø170 × 160 mm50W5,000 lmBlack / White
Ø200 × 190 mmcURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits6,000 lmBlack / White

Luminous output values are calculated using the provisional 100 lm/W efficacy and are subject to confirmation by photometric testing.

Finish & Optical Appearance

Black and White IP65 Cylinder Downlights

Select a black or white finish to coordinate with the ceiling, architectural palette and interior materials. Product images also show different reflector appearances; confirm the available reflector configurations for the selected model when specifying.

Black IP65 surface mounted ceiling downlight product view
Finish Option

Black Surface Mounted Downlight

A dark cylindrical finish for contrast against light ceilings and contemporary commercial interiors.

White IP65 surface mounted ceiling downlight product view
Finish Option

White Surface Mounted Downlight

A clean, understated finish for coordinated ceiling installations and lighter architectural schemes.

White IP65 cylinder downlight with reflector detail
Optical Detail

Reflector Appearance

Review the reflector and aperture appearance with the project team. The standard beam angle for this series is 55°.

Commercial Lighting Applications

IP65 Surface Mounted Ceiling Lights for Covered Outdoor and Commercial Areas

Use the IP65 cylindrical ceiling downlight range in suitable locations where surface-mounted installation and protection against dust and water jets are required. Always assess the complete installation environment and local electrical requirements.

Product Construction & Performance

Key Features of the IP65 Surface Mounted LED Downlight

A practical specification overview for lighting distributors, contractors, architects and commercial project buyers.

01 / HOUSING

Extruded Aluminum Housing

Extruded aluminum construction forms the cylindrical luminaire body.

02 / PROTECTION

IP65 Protection

Rated for dust-tight protection and protection against water jets when correctly installed.

03 / OPTICS

55° Standard Beam Angle

A standard 55-degree beam angle for defined general and accent illumination.

04 / EFFICIENCY

100 lm/W Nominal Efficacy

Provisional series planning efficacy of 100 lumens per watt; final output should be confirmed by product testing.

05 / COLOR

CRI 80 or CRI 90

Choose the color-rendering option according to project specification.

06 / INSTALLATION

Surface-Mounted Ceiling Design

Designed for direct surface mounting to a suitable ceiling; this is not a recessed fixture.

For Lighting Distributors & Project Partners

IP65 Downlight Manufacturer and Project Supply

Prillumenlight supports professional buyers looking for surface mounted IP65 LED downlights for commercial lighting projects and product ranges. Share your target wattage, finish, CRI requirement and estimated quantity to discuss product suitability and supply details.

  • Six housing sizes from Ø80 mm to Ø200 mm
  • 15W to 60W power options
  • Black and white finish options
  • CRI 80 or CRI 90 selection
  • Project quantity and OEM inquiry support
Discuss Your Project
Black IP65 surface mounted cylindrical LED ceiling downlight side view
Technical Questions

IP65 Surface Mounted Downlight FAQs

Key information for specifying IP65 ceiling downlights in commercial projects.

Is this IP65 downlight recessed or surface mounted?

This product series is surface mounted. The cylindrical housing is installed directly onto a suitable ceiling surface; it is not designed as a recessed downlight.

What sizes and wattages are available?

The series includes six sizes: Ø80 × 90 mm at 15W, Ø100 × 100 mm at 20W, Ø130 × 130 mm at 30W, Ø150 × 140 mm at 40W, Ø170 × 160 mm at 50W and Ø200 × 190 mm at 60W.

What is the standard beam angle?

The standard beam angle is 55 degrees. Confirm the available reflector configuration for the selected model when preparing a project specification.

What input voltage does the IP65 ceiling downlight use?

The specified input voltage is 220–240V AC.

Is CRI 90 available?

Yes. CRI 80 or CRI 90 options are specified for this series. Confirm the selected CRI requirement when requesting a quotation.

What is the luminous efficacy?

The current planning figure is 100 lm/W. The corresponding lumen values are estimates; request the final datasheet or test report for confirmed luminaire output.

Can the IP65 downlight be used outdoors?

IP65 indicates dust-tight protection and protection against water jets. Suitability depends on the actual exposure, mounting details, wiring, installation instructions and local requirements. For outdoor use, confirm the specific installation conditions with the supplier.

Are black and white finishes available?

Yes. The product range is shown in both black and white finishes. Confirm availability for the required size and quantity.

Project Inquiry

Looking for an IP65 Surface Mounted LED Downlight Supplier?

Send us your required size, wattage, finish, CRI and project quantity. Our team can help review the product configuration for your commercial lighting application.

Request a Quote Contact Prillumenlight